I have a annovi pump the problem is that there is no suction for the chemicals to be sucked through( I already put a new strainer on it) Also where the water comes out through the bar adjustment I can not figure out to put it back together( the spring and this piece that has 4 holes in the end) Do I need to buy a new pump, new p/w or can this still be fixed

Please call with any info 585-690-1261
Thank you for your help

Pat Brennan
Owner
Hydrojet Power Washing

Upstream or downstream injection? It sounds downstream and that your unloader (the thing for Bar adjustment) is going out. Replace it. Take the old one off, put a new one on, and then hold the gun to properly adjust the pressure. It will make it easy.

SUPPORT OUR TROOPS

Bus. Phone 480-834-3434
Cell Phone 602-509-9741

Pat,

You will need to identify your unloader valve:
Pumps: Piston pumps, Plunger Pumps Industrial Triplex Plunger Pumps

and your pump:
AR North America - Pump Breakdowns

The links above will help with your identification
process.

AR North America is also a sponsor of this BBS
we are a distributor for them and supply you with
the needed items.

Attached Images

	ARNALOGO.jpg (58.4 KB, 28 views)
	logo-annovi.png (4.2 KB, 27 views)

Pressure Washer Sales & Service Specialists
Since 1979
A Sponsor of PowerWashNetwork since 2000
www.EasyCleanSystems.com
www.PressureWasherZone.com
www.PowerWashDirect.com
Mark McIntyre 800-292-EASY 916-638-0828
E-mail Mark Click Here