I got a situation where i will need about 400 ft of hose to hook into water. i have a 5000psi and 5gpm hot water maching that is currently hooked up to a 500gallon tank. I cannot get the water supply close enough. Has anyone used this much hose off a spigot? does anyone see any issues?

Any info would be appreciated. Thanks

I have and still do use that much hose on one center I do, So far I have had no problems but I guess it depends on the water pressure coming off the bib. I have one center that the water pressure is real low, so I let it fill my tank about 3/4 full and I can get by. I have a 370 gal setup. But for the most part you should be fine if it has good pressure off the bib. Mine is 8 gpm.

TLC Sweeping & Maintenance LLC
Reno, Nevada
775-762-1688

Terry Campbell

You should do just fine.

Lance Powell
Clay County Pressure Cleaning, Inc
904 535 4590
Pressure Washing Jacksonville Florida
Roof Cleaning Jacksonville Florida

Seems like alot of work just for water. Can you fill up the 500Gal tank near buy?? 1-2" line??

DAFF MOBILE WASH
WINDSOR, ONTARIO CANADA
DAFFMOBILEWASH@AOL.COM