Search results

For those interested. I have seen Jon's truck, inside and out. Better not waste any time it is well worth the money. I would also take advantage of the hose reel setup. I helped Jon with the design when he purchased the water tank from me a few months back.

Yes, What size orifice do you have? What is your gpm?

Try the European twist type connectors. Thay aren't as quick but I have found they will last longer.

A coat of wax after cleaning will help the appearance.

Tim, forget about the brush and lift. The X-Jet and chemical should be all you need. The X-Jet should deliver about 1,000 psi with a 3,000 psi @ 4 gpm machine. The best place to check your pressure output is between your hose and gun. If you don't have a ball valve install one at the end of...

John, Take the quick conncet plug ogg and check the orifice inside. It is possible it got left out or just has the wrong size for your machine. Mistakes happen. You should have a #13 if your machine is in the 5-6 gpm range.

Richard, that was the credit bureau, not the better business bureau. The BBB is for customers to find out about business . The credit bureau is for reporting non payments and late payments, also for running credit reports.

You can join the local credit bureau and report it on their file. It stays there for seven years unless you remove it. It will not get you paid but they will remember what they did for a long time.

Thanks Glenn, Aggregate concrete needs to cure for 30 days before sealing. White concrete (brushed or troweled) can be sealed after the water has dissipated WITH a CURE & SEAL product. The aggregate sealer is pure acrylic (30% solids) and the cure & seal also a pure acrylic but with 25%...

I feel by mixing the ocylic acid with hot water it works better. It is what we do and recommend.

Barry, New concrete needs to cure for 30 days before sealing.

Richard, Most chemical injectors have a 7:1 ratio. That would dilute the ocylic acid too much. However you can mix it 1:1 and run througt the X-Jet, it has a 1.6:1 ratio. This will give you a 3.2:1 ratio and should work fine. This way you can heat the ocylic acid by running your burner.

non payment Join your local credit reporting bureau. When they don't pay, report them. It won't get you your money but they will remember you FOR THE NEXT SEVEN YEARS. That is the lenght of time it will be on their credit report.

Mark , Carefully consider the tow vehicle and hitch combination. Before the trailer I have now I had a 16 Ft. tandem trailer (open). With all of your equiptment you could be pushing the Max. with two 3500 Lbs. axles. A 275 Lb. water tank full weighs 2294 Lbs. The trailer I have now broke the...

Yes, The lady that does my embroidery work for me and I trade sometimes. I always have plenty of shirts and caps for myself . Regular customers love the caps and when they wear them they are always advertising for you. If aryone needs those type items , she can ship them to you. She can do your...

Glen, The hot box will work great, but I would look at some of the skid units at xxxxxxxxxx. They have some 5GPM units in the $3200-$3500 price range. That is what I will do next time we need more equiptment. Steven Rowlett...

John, There is a phillips head screw on the pump head. You can adjust this screw to regulate the flow . Counter clockwise will allow the pump to run longer before the cycle stops. If that doesn't work give me a call at 1-800-357-6295. Steven Rowlett

Harold, I am able to do all of my rinseing with the x-jet. Can you do that with your injector or do you have to use a long wand? My method is much easier on your back. Steven Rowlett ROWLETT PRESSURE...

I am not sure what is different about the x-jet, but I haven't found any other injector that will perform like it. Glenn at ACE CLEANING SERVICE has the x-jet in stock. Steven Rowlett ROWLETT PRESSURE...

Milleer, I recommend installing an inline pump in the 3/4 line before the pump on each machine. That way you will be feeding the pressure washers instead of them sucking the water. Home Depot sells Flojet pumps and I recommend installing a check valve between the pump and pressure washer...