Search results

Thanks Mark, I should have put up a photo of the Rig hooked-up. I use a Bypass return to the Tank and it works well. I finally got my rig working well now. There are a few local Pressure Cleaning Shops here that build machines, one called J&N Equipment. And they have some custom Rigs they...

mark, Here is how the original K7 is installed now. Do you happen to know what brand and model this Turbo Nozzle is? Made in Italy, the Numbers after PAT is 08006AAAU1 The Red "A" actually looks like a reversed 4 , and not an actual A. All the letters are stamped in the Brass perfect so I...

Thanks Mark, I realized it was bad and since changed it back to the old, original K7. The new K7 was different than the old unit from 1996. I will take a photo of the old unit in the pump now. I would think they would be identical, but they are not. I removed the Ez Start unit and...

Here are some photos of my Rig, I got it fired-up today and it runs great. No smoke after 10 minutes. I got 3000 Lbs. at 8 GPM using a 65/10 Tip, makes quick work out of cleaning. It's a Hypro Pump and they are owned by Pentair now. I sent the pump to Pentair and the gent did a great job...

My Trusty 1996 Honda 18HP @ 8 GPM Hello Ladies & gents, I have taken out my Trusty 1996 Honda 18HP @ 8 GPM machine after 13 years of storage. It has 117 Hours on it. I squirted Fogging Oil in the 2 cylinders and turned it over before I stored it. I had the pump rebuilt, I soaked the...