For Sale
Trailer mounted power washer
tandem axle w/ electric brakes
3200 psi @ 6.5 gpm 12 volt burner
18 horse Vangard engine
machine only has 410 hours mounted on a 12’ open trailer w/ 225 gal. Water tank.
3 hose reels. 2 have about 200’ pressure hose and the other has about 100’...
Got a call today to bid the walks in front of a big grocery store that has lots of gum. How would you go about setting up a contract for this job. Quarterly, monthly or what? Do you charge more for the inital wash then drop the price or not?
Thanks
Jim
For all you that accept credit cards, I was just curious how much that increases your sells and how you go about setting this up. Any help would be great.
Jim
Had an interesting afternoon today. I've been on a cedar shingle roof for a couple of weeks now. First I wash the house roof of 60 Squares and pulled off for a couple of days to let the roof dry out before I sealed it and the owner calls me up and wanted the Garage of 35 square done too. Today...
Alright all you fleet washers, what's the secret to getting all the bugs off the top of the wind jammers? Do you all carry ladders to the job? Or do you just use longer brush poles?
Thanks,
Jim
I went and looked at a job the other day that was a HUGE 2½ story home, the lady wanted all 66 windows and 52 storms washed inside and out. A majority of the cleaning would have to be done with a (big) ladder. I'm not even sure my 32 footer would reach the upper level. While we were talking...
How hard and expencive would it be to build your own water recycling system? If you don't want to post on the board, please e-mail me.
Jim
------------------
I was asked to bid on an old stone building that has been around for many years. I don't have any problem with that but the water would run down hill for about 2 blocks. It is on top of a very steep hill with asphalt parking lots all the way down the hill. Does one need to recover this water...
I work full time in a machine shop and the owner told me that if I got the sandblasting attatchment I could have work there doing 4 overhead crane I-beams. Is there some kind of rust inhibitor that you can use that won't mess with the new paint or are they stuck with a rusty beam...