-
Check out this this free event.
rubber seals
- Thread starter Barry Loy
- Start date
Easy,
They will go bad after a while, and some times they just pop out of place. Go to your local supplier and ask for o-rings.
They come in two sizes for the gun connects and the hose. I think they are 3/8 on the hose and 1/4 on the gun tip. You can change them with a small screw driver. Pull out the old one and replace it with a new one.
While you are replacing make sure you stick it down on the little ledge inside the connecter.
Stay dry replace your o-rings today
------------------
Dan Flynn
Flynn Service Pro
www.powerwash.net
708/715-4206
They will go bad after a while, and some times they just pop out of place. Go to your local supplier and ask for o-rings.
They come in two sizes for the gun connects and the hose. I think they are 3/8 on the hose and 1/4 on the gun tip. You can change them with a small screw driver. Pull out the old one and replace it with a new one.
While you are replacing make sure you stick it down on the little ledge inside the connecter.
Stay dry replace your o-rings today
------------------
Dan Flynn
Flynn Service Pro
www.powerwash.net
708/715-4206
Barry ,
Dan is right you can pick them up at your local dealer, I would buy the Viton O rings they are a better o ring they stand up to heat better also pick up a "pick" tool it looks like the tool the dentist uses on your teeth and they really help in getting the o rings in and out.
O ya Landa sells a pack of O rings in a set of 10 6 1/4" for nozzles
4 3/8" for couplers for about 5.00 a pack avaliable at our dealer
Dan is right you can pick them up at your local dealer, I would buy the Viton O rings they are a better o ring they stand up to heat better also pick up a "pick" tool it looks like the tool the dentist uses on your teeth and they really help in getting the o rings in and out.
O ya Landa sells a pack of O rings in a set of 10 6 1/4" for nozzles
4 3/8" for couplers for about 5.00 a pack avaliable at our dealer
H
hotwaterwisard
Guest
Yes 1/4 and 3/8inch O-rings. The viton lasts longer with chemicals and hot water.
------------------
Hotwaterwizard@aol.com John DeRosa If you have a Machine Problem, I'm here to help.
------------------
Hotwaterwizard@aol.com John DeRosa If you have a Machine Problem, I'm here to help.