Recent content by Backbrusher

I use Wolman F and P now because it is faster to apply and a good product but when I started all I used was CWF-UV cedar or clear. It is a good product and for his situation I believe the right choice. I have done the same thing when there is color that won't come off. 5 months to fail? I...

40 8' sections? If they are 6' high that is 48 sq ft per side, 96 sq ft per panel. 40 x 96 is 3,840 sq ft of fence and if you clean and seal that for $1000 you can come do all my work while I go to the ocean. Figure 150 sq feet per gallon coverage. I guess if you are just spraying it without...

Just seal the deck and put a very light coat on the new boards. Of course the new ones will look different but I would not let that hold you up. Finish it before too much time goes by.

Did a Trex this year. Used hypochlorite based deck cleaner and turned out great. Some boards were spaced too close together. They keep their dogs in the enclosed sunroom and there is a screen under the Trex boards so mosquitos cannot get in. I had to pull dog hair out by hand by it paid well.

Sorry bout that. I did one Wolman strip job without a respirator and never again. They are a pain but you can really feel the difference at the end of the day. I always use them spraying and should when brushing. The tradeoff between sweating and breathing that junk is well worth it. Look...

I u

Oil sealer I hate masking, and I hate breathing the spray. I only spray lattice if it safe and fences.I wear a high quality double filter respirator, properly fitted. I sealed a raised 12 x 20 townhouse deck, no steps in 2 hours the other day by brush. Windy as hell. I use the "no spraying"...

NEW WOOD I have used their Seasonite on a few new decks and that stuff does work. It lets the wood dry out evenly the first year but the wood must be clean or the dirt will be trapped. Otherwise remove the mill glaze with cleaner then apply a good sealer. I use Wolman F and P which can be put...

If you use Wolman or Flood products make sure to redeem them for business items or various products. ------------------

I have good luck with Wolman's powder wood cleaner. It is a pain to use sometimes because of the mixing but for the environment and its cleaning ability I am satisfied. ------------------