Recent content by pondandco

Do you add the surfactant right into the degreaser?

Thanks for the quick reply! Kevin

Hi everyone! I have for the most part stuck to side walks and trash enclosures. I have a Rubys that I do on a weekly basis and they just asked me if I could do there roof/awning. It is painted aluminum. I did a test spot with just a warm rinse and it got it pretty clean but there was still...

Well when I ran it today I was pushing about 220 degrees. My machine can heat up to 250 though. I did not use any chems. It seemed to get the concrete pretty clean, but I think I was moving a little too slow. Another question; I would go forward down the driveway and then walk backward going...

Thanks for the advise Jim! I tried it out on my driveway today before I use it tonight on a job... I did notice a little bit of stripeing, I will definitely have to figure that out! My driveway was poured a year ago so I didn't try out the 1500 tips yet, I need to find another spot to practice...

Hello everyone! Up until recently I have only used a wand and a variety of nozzles for flat work. I just purchased my first surface cleaner (ww classic). My machine is 3500 Psi 5.5 gpm hot water. When I use a wand I usually only use between 2,000 and 2,500 Psi. When using the surface...

Thanks for the input!

Where is the option to edit?

I am unable to edit my posts

Hey Carlos, I am not sure... the property manager didn't seem to know.. All they have been doing is hosing it down and scrubbing with a broom.

Ok, so I went back and took some pics of the brick... There seems to be some white stuff on them?? Some areas look water stained and some spots that are bright white have a powdery feel to it. Not sure what type of brick this is? Can you tell from the pictures if I could use a turbo nozzle or...

Hi everyone!! I got a call today to bid sidewalk cleaning at a small shopping center... Most of the sidewalk is concrete, but there are a few store fronts that have cheap red brick as the flooring. Can I use a surface cleaner on the brick like any other concrete? Or does brick have to be...

Thank you both for suggestion... I will give mark a call next week. I was a little hesitant anyway because it is 4.5 gpm and I really wanted over 5, guess I got excited about the brand. Thanks again! Kevin

Hi Ken, I am in the process of looking for a new unit. I found a Hotsy on Craigslist and it is about three years old. The guy isn't the original owner so he wasn't sure how many hours are on it. It isn't leaking water anywhere, and the oil looks clean but is it worth it to spend $3,000 on a...

Hello all!! I have been reading all of your posts on this forum and wanted to say thank you for the wealth of information you give! I just started my adventure doing commercial flatwork... Two store fronts so far, but hoping to expand soon... I still have a full-time job by day (wife was...