10 yr old 3200psi 4 gal 11hp honda AR pump blew out the hose on thurs. My guess is the unloader valve failed and the pressure continued to build and popped the hose out near the gun. Is it ok to just get an unloader or would a whole new pump and unloader be wise. Keep in mind I just went out and bought a new one to finish the job that day. The last time a machine went on me the unloader simply wouldn't let the pressure build.
-
Check out this this free event.
hose blew out from faulty unloader
- Thread starter jeffex11
- Start date
Mark
Moderator / Sponsor
You may get away with just replacing the unloader,
I would suggest an AL606 or AL606EZ. If replacing
the pump & unloader I suggest the AR model RKV4G35
we offer a "Pump Made Ready" version of this pump
ready to bolt on to your engine.
http://www.powerwashdirect.com/shop/item.asp?itemid=56
I am assuming this is a cold water direct drive unit
if so be sure to inspect the engine shaft before ordering
a new pump. If it is a belt drive pump :
http://www.powerwashdirect.com/shop/category.asp?catid=14
[hello]
I would suggest an AL606 or AL606EZ. If replacing
the pump & unloader I suggest the AR model RKV4G35
we offer a "Pump Made Ready" version of this pump
ready to bolt on to your engine.
http://www.powerwashdirect.com/shop/item.asp?itemid=56
I am assuming this is a cold water direct drive unit
if so be sure to inspect the engine shaft before ordering
a new pump. If it is a belt drive pump :
http://www.powerwashdirect.com/shop/category.asp?catid=14
[hello]