robertwarren
New Member
Hello, My name is Robert. I'm in NC. I just wanted to say thanks so much for all the valuable info. I've been reading these posts for about 10 weeks. I have just started my own business. I wasn't able to start with as mush as I would like to, I was on a very limited budget. So I'll give you guys something to chuckle about. I have a 3700 psi 4 gpm 13 hp Honda engine cold water direct drive from Lowes. I'm working out of a 1988 S-10 pick up. I know you are laughing. It does have new white paint, new tires and nice magnetic signs. It doesn't look bad ! I have a regular wand and a 79" wand. 150' 3/4" supply hose, 100' 3/8" pressure hose (no hose reels) and an x-jet (the original one) The only tank is a 55 gal plastic drum laying on it's side with a ball valve and 10' hose running to my pump I use the customer's water running in a 2' hole I cut in the drum.(no float valve) I just wanted to make sure I always had enough flow to my pump. I have only done one job (small house) but it worked real well! Anyway I have a long way to go,but it could have been worse. I was wondering what kind of protective clothes you guys wear like for applying chems. I know that the bleach will ruin most clothes. Have a great day and thanks again!