Recent content by A1PW.LLC

Mathew, What type of Cat pumps?

Hey Rock Well I tried a General pump last year because of the price of the cat pumps.Well it didn't last the whole year. My other unit has a Cat pump on it. It's been running strong for 6 years with only one seal change. And I run my chemicals through my pump. I would go with the Cat pump...

Hey Chano, They have a product called gutter zap. You can use that or you can use castrol super clean it works great. You might have to do a little scrubbing.

Hey Ed, Blackhawk's huh! Cool. Well I use to work on safety relief valves for ten years. (Or pop off valves as some call them). And if it is is popping it's because it has reach the set pressure it was set to start relieving. Most of them can be reset. I don't know what type of valve is on...

No, not for a hot water machine. But if you don't need hot water go with a brand new cold water with a warranty. I would just be a little scared about buying something that was a rental.

2k for a used machine seems a little high. Do you really need hot water? Water cannon can send you a cold water unit to your door cheaper than that and it will be brand new.

Most houses can keep up with a 4 gpm machine. On my rig I have a small 35 gallon tank as a buffer tank. Just in case someone has low well pressure.

Go with the Honda!

You sure do spend alot of time bashing your competitors. You don't have enough work to keep yourself busy?

I agree I use a surface cleaner all the time.

I use a varible nozzle. You can change from high to low pressure and spray pattern very quickly.

Has anyone used a chemical that will clean the mildew off brick walkways. I have tried bleach before and it works to some degree. But some bricks still have some green spots. I know hot water works great but all I have is cold water units. If someone has had success with a chemical with a cold...

Hey Mike, $10.00 a hour is way to low. But you are just starting out. So I might be able to do the same job for two hours with my equipment. That would make it $50.00 a hour. A surface cleaner will save you alot of time. That's why you need to charge by the square ft. not hour. But if you do...

NAPA will repair a hose for $7.00

http://shopping.netledger.com/app/site/site.nl/site.ACCT18259/mode.items/sc.5/category.2027/.f Give this place a look.