B.J. ELLIS
New Member
I have a Mi-T-M machine with a 12 volt Wayne burner, Suntec fuel pump, with a exterior suntec shut off valve.(see pic) My problem is the burner is not getting any fuel (diesel) I replaced the inline fuel filter, removed discharge line going back to fuel tank started machine (burner on) and got flow and pressure. I removed the copper tubing going from the shut off valve to the burner, started the machine (burner on) and no flow. (all this time with the wand open to assure water flow. I have not checked the pressure switch because I don't know how to bypass the switch, nor have I made sure the fuel nozzle was not clogged, because I'm unsure where and how to get to it. Any suggestions would be greatly appreciated, work is stacking up quick!!