Search results

Mark do they sell the drums separately.

We did 1 kec job twenty years ago and decided it wasn't for us when we get a call for that we decline.

200 ft should be no problem at all.

No the shouldn't be a problem with back pressure on the pump. how many feet of hose are you going to run you will have a pressure drop with a long run of hose.

John that isuzu wont have any problem with a landscape trailer. it might not be fast but it will pull it no problem.

I guess you could put a ball valve on one machine never thought about that. Have you ever held on to 10 gpm wand, It will wear you out, thats why I would unhook one machine. No I dont have 10 gpm,I run one 6.5 gpm and one 5 gpm but I have hooked two machines together to get 10 gpm.

Gunn your not going to move twice as fast but you will get done quicker. you have to think about when your going to use your wand you have to unhook one of the machines. 10 gpm will wear you out quick I have found that if you have another machine let a employee use it to pop gum and rinse. You...

First you need to find out who the managment company is and see if you can get on their vender list. Sometimes you have to jump through hoops but its nice when the big jobs come in. where are you located in florida.

gull maint i might be interested in the hot box. call me 407-957-6566 tell me about it how many btu's how many gpm's i can run through it. greg

The ones in florida dont want to pay very much. but i would charge anywhere from 75 to 125 a month. most all free standing pizzahuts are roughly the same size. shouldnt take more than 1 hour to do no matter how dirty it is. thats for the concrete sidewalks around the building. sweeping companies...

Are the roofs flat cement tile or are they barrel tile. if its flat tile they can be walked on no problem,barrel tile is alittle trickier but can still be walked. but if they dont want you walking you are going to have to use ladders,charge acordingly. the no pressure part shouldnt be a problem...

I was just stating what works for me. when you use low pressure 12 volt pumps no sand/granules come off the roof. thats the reason people dont what their roofs pressure washed in the first place. the sand/granules are there for a reason. I do use sodium hydroxide on surfaces that i feel need it...

Dans right, new again has sodium hydroxide in it ask for the msds sheet. In my opinion not good idea to put degreaser on asphalt based shingle. I buy chlorine less than .75 cents a gallon in 50 to 100 gallon bulk. I can clean a average 3000 sq ft roof for 18 dollars in material in about 1 hour...

Thanks Mark thats what I thought just wasnt sure.

If I spin a general ts2021 at 1125 rpms what would my gpm/psi be. The pump is rated for 1450 rpms. thanks for the help.

The stripers with the aerosol cans dont work worth a crap,dont waste your money. If your not set up to do this contract someone to do it for you. add 10 to15% to their price.

I have a homeowner with a log house sealed with sikkens cetol 1,with mildew on it. my question is can I wash it with a bleach wash without damaging finish or do I need to strip it. He wants to seal again after the wash. He sealed with sikkens cetol 1 when new, now sikkens has informed him cetol...

Dawn is just used as a surfacant. It keeps the chlorine from running down the roof, helps it hold a little better. I usually add about half a bottle to 35 gallons of chlorine. No this method will not damage the roof. But it will damage plants if you dont water before and after. Good luck

Thats how Ive been doing it for years. I use 1520/2520 nozzles for chemical application works great. Its alot faster than carrying jugs of chemical around. If you put your chem hose in your tank it works good for rinsing to.

the motor is rated to run at 3600 rpm.